Summary

• A vulnerability in the detection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to send data directly to the kernel of an affected device.

  The vulnerability exists because the software improperly filters Ethernet frames sent to an affected device. An attacker could exploit this vulnerability by sending crafted packets to the management interface of an affected device. A successful exploit could allow the attacker to bypass the Layer 2 (L2) filters and send data directly to the kernel of the affected device. A malicious frame successfully delivered would make the target device generate a specific syslog entry.

  Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

  This advisory is available at the following link:
  https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190501-asa-ftd-bypass

Affected Products

• Vulnerable Products

  This vulnerability affects Cisco Firepower 2100 Series devices that are running a vulnerable release of Cisco ASA Software or FTD Software. For information about which Cisco ASA Software and FTD Software releases are vulnerable, see the Fixed Software section of this advisory.

  Determining the Cisco ASA Software Release

  To determine which Cisco ASA Software release is running on a device, administrators can log in to the device, use the show version | include Version command in the CLI, and refer to the output of the command. The following example shows the output of the command for a device that is running Cisco ASA Software Release 9.9.2.18:

  ciscoasa# show version | include Version
  Cisco Adaptive Security Appliance Software Version 9.9.2.18
  Device Manager Version 7.4(1)
  .
  .
  .

  If a device is managed by using Cisco Adaptive Security Device Manager (ASDM), administrators can also determine which release is running on a device by referring to the release information in the table that appears in the Cisco ASDM login window or the Device Dashboard tab of the Cisco ASDM Home pane.

  Determining the Cisco FTD Software Release

  To determine which Cisco FTD Software release is running on a device, administrators can log in to the device and use the show version command in the CLI. The following example shows the output of the command for a device that is running Cisco FTD Software Release 6.2.2:

  > show version
  
  ------------------[ ftd ]-----------------------
  Model : Cisco Firepower 2130 Threat Defense (77) Version 6.2.2 (Build 81)
  UUID : 0cd3595a-7efa-11e7-aaa1-ee3989c8bf25
  Rules update version : 2017-12-20-001-vrt
  VDB version : 290
  ----------------------------------------------------

  Products Confirmed Not Vulnerable

  Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.

Workarounds

• There are no workarounds that address this vulnerability.

Fixed Software

• Cisco has released free software updates that address the vulnerabilities described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license: https://www.cisco.com/c/en/us/products/end-user-license-agreement.html

  Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.

  When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page, to determine exposure and a complete upgrade solution.

  In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.

  Customers Without Service Contracts

  Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html

  Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.

  Fixed Releases

  Customers are advised to upgrade to an appropriate release as indicated in the applicable table in this section. In the following table(s), the left column lists Cisco software releases. The right column indicates whether a release is affected by the vulnerability described in this advisory and the release that includes the fix for this vulnerability.

  Cisco ASA Software

  Cisco ASA Software Release	Recommended Release for This Vulnerability
  Prior to 9.41	Not vulnerable
  9.4	Not vulnerable
  9.51	Not vulnerable
  9.6	Not vulnerable
  9.71	Not vulnerable
  9.82	9.8.4
  9.9	9.9.2.50
  9.10	9.10.1.17
  9.12	Not vulnerable

  ¹Cisco ASA Software releases prior to Release 9.4 and Cisco ASA Software Releases 9.5 and 9.7 have reached end of maintenance. Customers should migrate to a supported release that includes the fix for this vulnerability.
  ²Only software releases 9.8.2 and later are vulnerable.
  

  Cisco FTD Software

  Cisco FTD Software Release	Recommended Release for This Vulnerability
  6.0	Not vulnerable
  6.0.1	Not vulnerable
  6.1.0	Not vulnerable
  6.2.0	Not vulnerable
  6.2.1	6.2.3.12
  6.2.2	6.2.3.12
  6.2.3	6.2.3.12
  6.3.0	6.3.0.3
  6.4.0	Not vulnerable

  To upgrade to a fixed release of Cisco FTD Software, customers can do one of the following:

  • For devices that are managed by using Cisco Firepower Management Center (FMC), use the FMC interface to install the upgrade. After installation is complete, reapply the access control policy.
  • For devices that are managed by using Cisco Firepower Device Manager (FDM), use the FDM interface to install the upgrade. After installation is complete, reapply the access control policy.

Exploitation and Public Announcements

• The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.

Source

• This vulnerability was found during internal security testing.

URL

• https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190501-asa-ftd-bypass

Revision History

• Version	Description	Section	Status	Date
  1.1	Updated the FTD fixed releases table to indicate that FTD Software Release 6.3.0.3 is available.	Fixed Software	Final	2019-May-02
  1.0	Initial public release.	-	Final	2019-May-01

  Show Less