Summary

• A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to send a malicious packet to the management interface on an affected system and execute a command-injection exploit.
  
  The vulnerability is due to incorrect input validation of user-supplied data to the NX-API subsystem. An attacker could exploit this vulnerability by sending a malicious HTTP or HTTPS packet to the management interface of an affected system that has the NX-API feature enabled. A successful exploit could allow the attacker to execute arbitrary commands with root privileges.

  Note: NX-API is disabled by default.

  Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
  
  This advisory is available at the following link:
  https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180620-nx-os-api-execution

  This advisory is part of the June 2018 Cisco FXOS and NX-OS Software Security Advisory Collection, which includes 24 Cisco Security Advisories that describe 24 vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: June 2018 Cisco FXOS and NX-OS Software Security Advisory Collection.

Affected Products

• Vulnerable Products

  This vulnerability affects the following Cisco products if they are running a vulnerable release of Cisco NX-OS Software:

  • MDS 9000 Series Multilayer Switches
  • Nexus 2000 Series Fabric Extenders
  • Nexus 3000 Series Switches
  • Nexus 3500 Platform Switches
  • Nexus 5500 Platform Switches
  • Nexus 5600 Platform Switches
  • Nexus 6000 Series Switches
  • Nexus 7000 Series Switches
  • Nexus 7700 Series Switches
  • Nexus 9000 Series Switches in standalone NX-OS mode
  • Nexus 9500 R-Series Line Cards and Fabric Modules

  See the Details section for information on how to determine if NX-API is enabled on the device.

  For information about which Cisco NX-OS Software releases are vulnerable, see the Fixed Software section of this advisory.

  Determining the Cisco NX-OS Software Release

  Administrators can check the release of Cisco NX-OS Software that is running on a device by using the show version command in the device CLI. The following example shows the output of this command on a device that is running Cisco NX-OS Software Release 7.3(2)D1(1):

  nxos-switch# show version

  Cisco Nexus Operating System (NX-OS) Software
  TAC support: http://www.cisco.com/tac
  Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
  Copyright (c) 2002-2017, Cisco Systems, Inc. All rights reserved.
  The copyrights to certain works contained in this software are
  owned by other third parties and used and distributed under
  license. Certain components of this software are licensed under
  the GNU General Public License (GPL) version 2.0 or the GNU
  Lesser General Public License (LGPL) Version 2.1. A copy of each
  such license is available at
  http://www.opensource.org/licenses/gpl-2.0.php and
  http://www.opensource.org/licenses/lgpl-2.1.php
  Software
    BIOS:      version 2.12.0
    kickstart: version 7.3(2)D1(1)
    system:    version 7.3(2)D1(1)
  .
  .
  .
  
  

  Products Confirmed Not Vulnerable

  Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.

  Cisco has confirmed that this vulnerability does not affect the following Cisco products:

  • Firepower 2100 Series
  • Firepower 4100 Series Next-Generation Firewall
  • Firepower 9300 Security Appliance
  • Nexus 1000V Series Switches
  • Nexus 1100 Series Cloud Services Platforms
  • Nexus 3600 Platform Switches
  • Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode
  • UCS 6100 Series Fabric Interconnects
  • UCS 6200 Series Fabric Interconnects
  • UCS 6300 Series Fabric Interconnects

  Cisco has not investigated whether this vulnerability affects Cisco Nexus 4000 Series Switches, Cisco Nexus 5010 Switches, or Cisco Nexus 5020 Switches because those products have reached end-of-life status. For more information, refer to the End-of-Sale and End-of-Life Announcement for the Cisco Nexus 4000 Series Switch Modules for IBM BladeCenter and the End-of-Sale and End-of-Life Announcement for the Cisco Nexus 5010 and Nexus 5020 Switches.

Details

• On Cisco Nexus devices, CLIs are run only on the device. NX-API improves the accessibility of these CLIs by making them available outside of the switch by using HTTP/HTTPS. NX-API supports show commands and configurations.

  The vulnerability described in this advisory only affects NX-OS devices configured with the NX-API feature enabled. To exploit this vulnerability, a malicious packet would need to be sent to the management interface of an affected device.

  To determine whether a Nexus device is configured with NX-API enabled, administrators can use the show feature | include nxapi command from the NX-OS CLI and verify that it is enabled. The following example shows the NX-API feature enabled on a device running NX-OS Software:

  nxos-switch# show feature | include nxapi
  nxapi                1       enabled

  A configured management interface would look similar to the following example:

  switch# configure terminal
  switch(config)# interface mgmt 0
  switch(config)# ip address 192.168.100.1/24
  switch(config)# vrf member management

Workarounds

• There are no workarounds that address this vulnerability.

Fixed Software

• Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:
  https://www.cisco.com/c/en/us/products/end-user-license-agreement.html

  Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.

  When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page, to determine exposure and a complete upgrade solution.

  In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.

  Customers Without Service Contracts

  Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC:
  https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html

  Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.

  Fixed Releases

  Customers are advised to upgrade to an appropriate release as indicated in the applicable table in this section. To help ensure a complete upgrade solution, consider that this advisory is part of a collection. For a complete list of the advisories in the collection and links to them, see Cisco Event Response: June 2018 Cisco FXOS and NX-OS Software Security Advisory Collection.

  In the following tables, the left column lists releases of Cisco FXOS or NX-OS Software. The center column indicates whether a release is affected by the vulnerability described in this advisory and the first release that includes the fix for this vulnerability. The right column indicates whether a release is affected by all the vulnerabilities described in this collection of advisories and which release includes fixes for those vulnerabilities.

  MDS 9000 Series Multilayer Switches: CSCvd47415

  Cisco NX-OS Software	First Fixed Release for This Vulnerability	First Fixed Release for All Vulnerabilities Described in the Collection of Advisories
  5.2	Not vulnerable	8.1(1a) or 8.2(1)
  6.2	Not vulnerable	8.1(1a) or 8.2(1)
  7.3	8.1(1a)	8.1(1a) or 8.2(1)
  8.1	8.1(1a)	8.1(1a) or 8.2(1)
  8.2	Not vulnerable	Not vulnerable

  Nexus 3000 Series Switches: CSCve03216

  Cisco NX-OS Software	First Fixed Release for This Vulnerability	First Fixed Release for All Vulnerabilities Described in the Collection of Advisories
  Prior to 7.0(3)I4	7.0(3)I4(7)	7.0(3)I7(4)
  7.0(3)I4	7.0(3)I4(7)	7.0(3)I7(4)
  7.0(3)I5	7.0(3)I7(1)	7.0(3)I7(4)
  7.0(3)I6	7.0(3)I7(1)	7.0(3)I7(4)
  7.0(3)I7	Not vulnerable	7.0(3)I7(4)

  Nexus 3500 Platform Switches: CSCve03216

  Cisco NX-OS Software	First Fixed Release for This Vulnerability	First Fixed Release for All Vulnerabilities Described in the Collection of Advisories
  6.0(2)	7.0(3)I7(2)	7.0(3)I7(4)
  7.0	Not vulnerable	7.0(3)I7(4)

  Nexus 2000, 5500, 5600, and 6000 Series Switches: CSCve03224

  Cisco NX-OS Software	First Fixed Release for This Vulnerability	First Fixed Release for All Vulnerabilities Described in the Collection of Advisories
  6.0	Not vulnerable	7.3(3)N1(1)
  7.0	Not vulnerable	7.3(3)N1(1)
  7.1	Not vulnerable	7.3(3)N1(1)
  7.2	Not vulnerable	7.3(3)N1(1)
  7.3	7.3(3)N1(1)	7.3(3)N1(1)

  Nexus 7000 and 7700 Series Switches: CSCvd47415

  Cisco NX-OS Software	First Fixed Release for This Vulnerability	First Fixed Release for All Vulnerabilities Described in the Collection of Advisories
  6.2	Not vulnerable	8.1(2) or 8.2(1)
  7.2	7.3(2)D1(1)	8.1(2) or 8.2(1)
  7.3	7.3(2)D1(1)	8.1(2) or 8.2(1)
  8.0	8.1(2)	8.1(2) or 8.2(1)
  8.1	8.1(2)	8.1(2) or 8.2(1)
  8.2	Not vulnerable	Not vulnerable

  Nexus 9000 Series Switches in standalone NX-OS mode: CSCve03216

  Cisco NX-OS Software	First Fixed Release for This Vulnerability	First Fixed Release for All Vulnerabilities Described in the Collection of Advisories
  Prior to 7.0(3)I4	7.0(3)I4(7)	7.0(3)I7(4)
  7.0(3)I4	7.0(3)I4(7)	7.0(3)I7(4)
  7.0(3)I5	7.0(3)I7(1)	7.0(3)I7(4)
  7.0(3)I6	7.0(3)I7(1)	7.0(3)I7(4)
  7.0(3)I7	Not vulnerable	7.0(3)I7(4)

  Nexus 9500 R-Series Line Cards and Fabric Modules: CSCve03234

  Cisco NX-OS Software	First Fixed Release for This Vulnerability	First Fixed Release for All Vulnerabilities Described in the Collection of Advisories
  7.0	7.0(3)F2(2)	7.0(3)F3(3a)

Exploitation and Public Announcements

• The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.

Source

• This vulnerability was found during internal security testing.

URL

• https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180620-nx-os-api-execution

Revision History

• Version	Description	Section	Status	Date
  1.1	Updated Fixed Releases for the MDS platform.	Fixed Software	Final	2018-July-05
  1.0	Initial public release.	-	Final	2018-June-20

  Show Less